Sitemap

Repairs

Shop by Category

Contact

Kingdom Appliance Care

15 Balgeddie Park

Glenrothes

Fife

KY6 3NY

01592 303025

© Kingdom Appliance Care 2018.

How To Replace A Logik Oven | Cooker | Fan Oven Element | Model LFTC50W12 | Buy Logik Fan Oven Eleme


In this post we will document the procedure of replacing the main oven fan element in a Logik oven. The model number of the Logik cooker we will be working on is a LFTC50W12.

Unlike other oven brands, this main oven fan element can be replaced from inside the oven cavity. This eliminates the need to manually handle the appliance furthermore reduces the risk of cuts and damage to property during removal.....happy days!

This article is a general guide of "How to replace an oven element" Of course, we always recommend using the service of a Professional Appliance Engineer however, we do appreciate that those 'competent' to carry out this type of work safely - will take on the task.

All Professional Engineers should carry the appropriate electrical test equipment to prove the safety of an appliance, over and above isolating the equipment at the circuit breaker & cooker switch. We understand that the everyday person is unlikely to own such equipment so, extra caution must be observed at all times. **THINK SAFETY - ELECTRICITY CAN KILL YOU AND OTHERS AROUND YOU THROUGH NEGLEGENT ACTS AND EMISSIONS**

You can buy the correct main oven fan element to fit your Logik oven or cooker direct from our online shop

https://www.kingdomappliancecare.co.uk/product-page/j

Scope of this article

To safely and successfully remove and replace this Logik main oven fan element on the model shown in the image below - Logik Cooker Model number - LFTC50W12

After successfully carrying out the appropriate electrical safety tests, we can switch the appliance back on to complete the function test. Switch the circuit breaker on by pulling the switch upwards. Switch the double pole cooker switch back on, the switch falls to on. There should now be power to the clock timer on the cooker. Set the clock in line with the manufacturers instructions then select the main oven function and set the temperature to maximum. As the new element contains contaminants from the manufacturing process, the new element must 'burn off' for a period of time. The senses will decide when this process is complete as you will smell it quite clearly. Allow the appliance to reach full temperature which will properly test the new element and main oven thermostat function. Happy?....job done! Your Zanussi oven is now ready to use.

Hopefully this information is helpful for you.

Looking for a fan oven element for you Logik cooker or oven? We can help... you can purchase it direct from our shop. Follow the link below to buy the CORRECT fan element for your Logik LFTC50W12

https://www.kingdomappliancecare.co.uk/product-page/j


218 views